Sabrina Maxi can be supplied with the instant hot water unit HT1800 and with the optional power brush wand NS270BRUSH. Optional hand-tools are available, in plastic (NS10PN) or in aluminium (NS10ALL). If equipped with the patented SMARTKIT system, it is possible to perform automatic chemical dosing, carpet pre-spraying and rinsing.If equipped with the patented SMARTKIT system, it is possible to perform automatic chemical dosing, carpet pre-spraying and rinsing.
Advantages of Sabrina-Maxi:
High-waterlift technology allows incomparable dirt removal and shortest drying time: carpet can be dry in 1 hour!
The size of the machine is small compared to its tank capacity. The machine is easy to carry even in a small car.
Carpet tool with aluminium vacuum head, practically indestructible.
Special profile of the vacuum head, which allows to get the best suction even when the tool inclination changes.
The height of the handle is adjustable, for greater ergonomics. The handle allows the worker to lift the tool and to press the vacuum head down on carpet with a very small effort.
Spraying valve designed for avoiding any breaking.
Tubes in stainless steel, strong and rustproof for the whole machine life.
Quick disconnect spray nozzles, which can be removed by hand, without using any tool. The nozzles can be easily cleaned.
It is possible to attach the optional instant hot water unit (HT1800) to the machine, in order to make the cleaning even more effective.
Using the optional power-brush tool NS270BRUSH, it is possible to get excellent cleaning results, leaving carpet perfectly clean and dry in a single pass.
With the optional vacuum tool NS270TURBODUST, it is possible to vacuum dust before cleaning, with the same machine
Other technical advantages of Sabrina-Maxi:
High density polyethylene tanks, very strong and made for lasting a long time.
Transparent unbreakable cover, which allows to see the dirty water while it is sucked.
Drainpipe for easily emptying the recovery tank.
Drain valve for draining completely the solution tank.
The filter of the vacuum motor is easily removable for cleaning.
The gaskets are replaceable by hand since they are not glued. Easy to clean and change.
Strong wheels, in antimark rubber.
Brass quick-disconnect couplings, reliable and strong.
Water pump with internal bypass, which allows an automatic regulation of the optimal water flow according to the tool used. Moreover, the bypass device makes the pump more reliable and avoids problems in the years.
Water pump with external rectifier, specially sized for a greater reliability.
Vacuum motor with thermal protection against overload.
Vacuum motor treated against rust.
Both motor and pump can work continuously.
Modular design that makes the maintenance easier. The maintenance of the machine can be done at low costs.
|Recovery tank capacity:
|Solution tank capacity:
||Two stages - High Waterlift
||3000 mm H2O
|Pump with by-pass:
|Number of nozzles:
|Weight (machine body):
|Weight (packaged machine):
||38 x 50 x 78 cm
||42 x 65 x 91 cm
||High density polyethylene
|Suitable to work with heater HT1800-220-M: